About EJK

EJK makes fuel-injection tuning practical

Do you want to adjust the fuel tuning of your fuel-injected engine after installing a different exhaust, a performance air filter, or other engine modifications, but are you not looking for a complicated tuning platform? EJK translates fuel-injection tuning into recognizable riding zones and operation with three buttons. No laptop, no separate software, and no complete replacement of the original ECU.

The goal is not to work with as many tables and settings as possible. The goal is an engine that responds well in practice: clean throttle response, smooth power delivery, and fuel tuning that better matches your motorcycle's configuration.

EJK Electronic Jet Kit Gen 3.5 fuel module with LED display and three push buttons

From Dynojet Jet Kit via Power Commander to EJK

To understand EJK properly, we need to go back to the carburetor. Mark Dobeck founded Dynojet in the world of motorcycle racing and carburetor tuning. The early Dynojet Jet Kits made it possible to tune a carburetor precisely with different jets and needles, without having to develop every engine completely from scratch.

When electronic fuel injection was introduced, the physical jet disappeared from view. The challenge remained the same: how do you provide an engine with the right amount of fuel after the intake, exhaust, or engine configuration has been changed? During the Dynojet era, that principle was extended to fuel-injected engines, resulting in the Power Commander: a piggyback module that could adjust the signal between the ECU and the injectors. Bill Kirkpatrick, later chief engineer at Dobeck Performance, was involved in the original design.

The Power Commander became a household name in motorcycle tuning. Mark Dobeck sold Dynojet in the late 1990s and later took another look at the core of the problem with Dobeck Performance. A classic fuel map based on engine speed and throttle position offers extensive control, but also requires software, knowledge, and proper tuning. Moreover, engine speed and throttle position together do not tell the whole story of what the engine needs to deliver at that moment.

This led to the philosophy behind the Electronic Jet Kit: retain the understandable principle of jets and needles, but combine it with a calculated engine load. Not a large grid that the user has to fill in cell by cell, but recognizable zones for steady riding, acceleration, and high load. This made EJK the practical next step in the same line of development: from the mechanical Dynojet Jet Kit, to the electronic Power Commander, to user-friendly load-based tuning.

The common thread

Jet Kits made carburetor tuning more accessible. The Power Commander brought programmable piggyback tuning to fuel-injected engines. EJK then translates fuel-injection tuning into engine load and simple riding zones, so the average motorcyclist does not need to become a tuner to better tune their motorcycle.

Why adjust the fuel settings?

A motorcycle is not factory-tuned solely for the most pleasant throttle response or the smoothest power delivery. The manufacturer must also account for emissions requirements, noise regulations, fuel quality, reliability, and a wide range of operating conditions.

If you subsequently change the airflow, for example by fitting a different Exhausts or a performance air filter, the desired amount of fuel may also change. An EJK allows you to correct for this without flashing the original ECU.

Exhausts or air filter modified

A modified intake or Exhausts can change the airflow. With a suitable EJK, you can adjust the fuel delivery accordingly.

Uneven throttle response

On certain motorcycles, a targeted fuel correction can help make the transition from closed to open throttle smoother and easier to control.

Practical fine-tuning

You can change settings directly on the module. This makes EJK suitable for riders who want to make small, controlled adjustments themselves.

How an EJK module works

EJK divides riding behavior into recognizable zones. Instead of viewing an extensive fuel map on a large computer screen, you can see which zone is active on the LED display. Use the MODE, +, and − buttons to cycle through the available functions and change a setting.

The exact functions and factory settings vary by EJK module and engine application. The green, yellow, and red zones form the basis for many modules; additional modes determine, among other things, when the module switches between these zones.

Model-specific really means model-specific

The connectors, base programming, rev limits, and handling of any oxygen sensors may vary by engine and model year. Therefore, always choose based on the exact model, version, and model year. The same number of cylinders alone is not sufficient.

Green zone Typically the range for idling, relaxed riding, and constant load.
Yellow zone Typically the range in which you accelerate and place greater demands on the engine.
Red zone Typically the high-load and wide-open-throttle range.

Load-based tuning: the same throttle position does not always mean the same load

This is the key technical difference between EJK and a classic Power Commander base map. Traditional Alpha-N tuning primarily uses two axes: engine speed and throttle position, also known as TPS. According to the manufacturer, EJK uses Rate, TPS and RPM to determine a calculated load value.

Why is that relevant? Suppose you are riding in third or sixth gear at the same RPM and approximately the same throttle position. In both cases, the engine is at the same point in a simple TPS/RPM table, but the actual load and the rate at which that load changes may differ. The same applies to riding on a flat road, uphill, or with extra luggage and a passenger.

A conventional map can be tuned very effectively, and modern Power Commander systems offer more options than just a simple two-dimensional table. However, for repeatability, a dyno run is usually performed in one selected gear. The resulting base map must then perform across multiple gears and real-world situations. EJK takes a different approach: its load-based logic helps the controller respond in each gear according to how the engine is actually being loaded.

EJK does not replace the original ECU's environmental sensors or corrections. Altitude, air temperature, and other conditions continue to be processed primarily by the original engine management system. EJK keeps that ECU active and builds its model-specific fuel correction on top of the injector signal.

That makes EJK particularly interesting for street riding. The focus is not a single impressive number at full throttle in one gear, but usable throttle response and smooth power delivery during acceleration, overtaking, accelerating out of corners, and riding under changing loads.

EJK versus Power Commander, Rapid Bike, and simple fuel modifiers

Not every tuning module tries to solve the same problem in the same way. The right choice depends on how much control you want, what modifications have been made to the engine, and how much time and budget you want to invest in tuning.

Solution How it works Best suited for
Simple sensor modifier Some inexpensive modules change or shift a single sensor signal, such as the measured intake air temperature, so that the ECU indirectly adjusts fueling. This is not full, zone-specific injector control. A very limited budget and a simple correction, with clear technical limitations.
EJK Electronic Jet Kit Model-specific piggyback module with load-based technology, preset base values, and direct control via three buttons. Standard EJK modules currently cost €300 at GeGShop. The average street rider who wants full fuel correction, more usable riding behavior, and simple fine-tuning without a laptop or a mandatory dyno session.
Power Commander Extensive programmable platform with software and detailed fuel tables. With additional hardware, AutoTune, and an individual dyno tune, highly specific configurations are possible, but the investment and complexity increase significantly. Riders and tuners who want maximum control, have extensive engine modifications, or deliberately choose to have a fully individual map created.
Rapid Bike Depending on the version, a more extensive or adaptive tuning platform with many adjustment options. The additional technology generally makes it more complex and expensive than the simple EJK approach. Riders who consider adaptive or advanced tuning functions more important than simplicity and a low total price.

Not stripped-down tuning, but purposefully selected tuning

EJK is not intended to be the platform with the most features. It is intended to provide as much practically relevant improvement as possible for a reasonable price. An extensive Power Commander or Rapid Bike setup can do more when every function, measurement, and final fraction of the tune matters. For many street motorcycles, however, that extra investment mainly provides more adjustment options than the rider actually needs.

The difference is therefore not limited to the purchase price of the module. If you combine a Power Commander with AutoTune and an individual dyno tune, the total cost can reach €1,000 or more, depending on the motorcycle and tuner. A standard EJK costs €300 at GeGShop, requires no additional module, and is supplied with useful base settings tailored to the model.

EJK Gen 3 and Gen 3.5: what is the difference?

Both generations are piggyback EFI controllers with load-based technology, an LED display, and push-button controls. The key difference lies in how the fuel correction is carried out.

Feature EJK Gen 3 EJK Gen 3.5
Fuel correction Adds fuel by extending the injector pulse width by a fixed value. Can add and remove fuel as a percentage of the original injector pulse width.
Controls Three buttons and an LED display; no computer needed for normal adjustments. Three buttons and an LED display; no computer needed for normal adjustments.
Technical design Simple, targeted enrichment within the configured zones. More correction range when an application needs to be tuned both richer and leaner.
Which one do you need? Do not choose one based solely on the generation. Always use the EJK module developed for your exact motorcycle, version, and model year.

What do you notice with a properly tuned EJK?

The greatest added value usually does not lie in a spectacular figure for maximum power. EJK was developed around usable power: how the engine responds and builds power during the miles you actually ride.

  • A more direct or more controllable throttle response, depending on the motorcycle and initial condition.
  • Smoother power delivery during acceleration and under varying loads.
  • A fuel correction that better suits an installed exhaust, air filter, or other minor engine modification.
  • Fine-tune it yourself without having to download a new map or connect a laptop every time.
  • The original ECU and original mapping remain intact; EJK works between them as an additional module.

Stay realistic

The result varies by motorcycle, configuration, and initial condition. That is why we do not state a fixed percentage or guaranteed number of additional horsepower. EJK is not an automatic self-learning tuner, does not measure the air-fuel ratio itself, and does not replace diagnosing a technical fault. For major engine modifications or when maximum precision is required, measuring with suitable equipment and, if necessary, tuning on a dynamometer remains the wisest approach.

Install and tune without unnecessary barriers

1

Choose the right application

Choose your model and model year to see the products selected for your motorcycle.

2

Connect the module

The model-specific wiring harness is installed at the prescribed connections between the ECU and injectors. In some cases, a connection around the lambda system also applies.

3

Start with the base settings

Many applications are supplied with a base setting for a common Stage 1 configuration. Always use the settings for your specific module. After that, make only targeted changes and record the original values.

The physical installation may be simple, but access to the injectors and connectors varies greatly by motorcycle. “Plug-and-play” describes the electrical connection; it does not mean that all fairing panels or the tank can remain in place on every model.

Frequently asked questions about EJK

Is EJK the same as an ECU flash?

No. With an ECU flash, the software in the original ECU is modified. EJK leaves the original ECU intact and, as a piggyback module, modifies the signal to the injectors. This makes the approach accessible and reversible, but EJK does not change all ECU functions.

What is the difference between EJK and a Power Commander?

A Power Commander is a more extensive programmable platform that traditionally works with fuel tables based on engine speed and throttle position. EJK also calculates the load based on Rate, TPS, and RPM and translates the tuning into recognizable riding zones. A Power Commander offers more expansion and software options; EJK emphasizes a model-specific base tune, three-button operation, and useful results without requiring an extensive tuning process.

Is a Power Commander then a bad choice?

No. For a heavily modified motorcycle, track use, or a rider who wants maximum control and extensive logging, a Power Commander with professional mapping and possibly AutoTune may be the better choice. EJK is intended for the large group of motorcyclists who primarily want a better-riding motorcycle without the cost and complexity of such a complete system.

Do I need a laptop or app?

No. The normal user settings are adjusted directly with the three buttons on the module and displayed through the LEDs.

Do I always need a dyno?

No. Many applications have model-specific base settings for a stock motorcycle or a common Stage 1 configuration, so a dyno is normally not needed to ride with EJK. The module can be fine-tuned on a dyno. This is valuable when you are seeking maximum accuracy, deviate significantly from the stock configuration, or are unsure what the engine needs.

Can EJK also remove fuel?

That depends on the generation. Gen 3 adds fuel. Gen 3.5 can add and remove fuel. Nevertheless, never choose solely based on this feature: the module must match the application exactly.

Is an EJK worthwhile on a completely stock motorcycle?

You can, but not every stock motorcycle needs the same correction. EJK is especially useful when there is a specific tuning goal, such as a modified intake or exhaust, or a known erratic throttle response in which fuel tuning plays a role.

Can I use settings from another motorcycle?

Not automatically. Even similar motorcycles can have different injectors, software, lambda control, or engine modifications. Use the model-specific base settings as a starting point and change one step at a time.

What if I am not sure which EJK fits?

Contact us with the make, model, version, model year, and an overview of the installed intake and exhaust components. Then we can specifically check which module and application are suitable.

Ready to practically tune your motorcycle's fuel injection?

Choose your model and model year to see the products selected for your motorcycle.

View all EJK modules