Snelle levering. helaas nog niet kunnen monteren op de motor.
Dit is een aanrader, als je het montage filmpje op de site volgt is het echt plug en play. Het was ook snel verzonden en uitermate goed verpakt. Bedankt
Remove light scratches, swirls, and dull spots faster and more evenly than with manual polishing alone
A polishing machine moves a polishing pad in a controlled way over the paint, allowing you to reduce paint defects evenly. With the right combination of machine, pad, and polish, you can tackle swirl marks, light oxidation, and dull spots, restoring the paint’s clarity.
This collection features the Monello LDA1000 Dual Action polishing machine. The machine combines a rotary motion with an 8 mm eccentric throw. This means the polishing surface does not continuously spin in exactly the same spot, and heat is distributed more evenly than with a traditional rotary machine.
This makes a Dual Action machine more accessible for users who want to work on paint correction in a controlled way. Still, careful use is important, especially on sharp edges, thin paint layers, and small painted motorcycle parts.
Manual polishing offers great control on small surfaces but requires time and physical effort. A Dual Action machine works faster and can deliver a more even result on larger areas such as a tank, fairing, hood, or door panel.
The machine is suitable for various steps. With a firmer pad and corrective polish, you address visible paint defects. With a softer pad and finishing polish, you refine the result and increase gloss.
The machine alone does not determine how much paint correction is achieved. A coarse pad with a strong polish provides more correction than a soft finishing pad with a fine polish.
When in doubt, always start with the mildest combination likely to give sufficient results. First, perform a test on a small area and evaluate the outcome before treating the entire motorcycle or car.
Wash and dry the vehicle thoroughly before starting. Stubborn dirt can be removed if necessary with detailing clay. Dirt particles between the pad and paint can cause new scratches during polishing.
Mask plastic edges, rubbers, emblems, and vulnerable parts. Work on a cool surface, out of direct sunlight, and in small, manageable sections.
Apply only a few drops of polish to the pad and spread the product first at low speed. Keep the pad as flat as possible on the surface and keep moving steadily.
Do not work for long on sharp edges or in one fixed position. Clean the pad regularly, as accumulated polish and removed paint residues reduce effectiveness. Protect the polished surface afterward with a suitable wax, sealant, or coating.