ID023B
Give your motorcycle a modern and aggressive look with the CNC Racing Wing LED turn signals. The compact design, dark smoked lens, and smooth sequential light movement combine to create a striking upgrade over conventional turn signals.
Each turn signal integrates ten LEDs that illuminate one after another. This creates a smooth light movement in the selected direction of travel. The dynamic effect not only looks modern, but also ensures that the turn signal clearly attracts attention.
The smoked lens keeps the LEDs subtly out of sight when the motorcycle is switched off. As soon as you activate the turn signal, the powerful light output becomes clearly visible. The Wing therefore combines a dark, refined appearance with good visibility while riding.
The housing is made of Aluminium and provides a sturdy base that withstands vibrations and the demands of daily use. The slim Wing design complements modern naked bikes, sport motorcycles, and sporty touring motorcycles particularly well, but thanks to the universal mounting it can also be fitted to many other motorcycles.
The turn signals are supplied as a complete set for the left and right sides. Thanks to the M8 mounting, they are widely compatible, although additional adapter plates, connectors, or extension cables may be required for neat model-specific installation.
When the original motorcycle is equipped with incandescent-bulb turn signals, the lower power consumption of LED turn signals may cause the flash frequency to become too high or trigger an error message.
On motorcycles with a separate turn-signal relay, a load-independent electronic relay is generally the neatest solution. When the flash frequency is controlled by the Dashboard & Instrumentation or a central control unit, a suitable resistor set may be required. If in doubt, have the appropriate solution for your motorcycle checked in advance.
No, this product is supplied as a complete set of two turn signals for the left and right sides.
Yes, the Wing turn signals are homologated by CNC Racing for use on public roads. The final installation must, of course, comply with the applicable requirements.
The ten powerful LEDs provide a clear and progressive light output. The smoked lens keeps the LEDs visually unobtrusive when they are off, but is designed to let the light shine through clearly when activated.
The M8 mounting is universal, but the original mounting holes and electrical connectors vary by motorcycle model. Additional mounting plates, adapter connectors, or resistors may therefore be required.
That depends on the motorcycle's electrical system. A load-independent relay is preferred when the original relay can be replaced. On electronically controlled systems, a resistor set may be required to maintain the correct flash frequency.
