Snelle levering. helaas nog niet kunnen monteren op de motor.
Dit is een aanrader, als je het montage filmpje op de site volgt is het echt plug en play. Het was ook snel verzonden en uitermate goed verpakt. Bedankt
Convert the alternator's AC voltage and prevent the battery and engine electronics from receiving too high or too low charging voltage
The alternator of a motorcycle generates alternating voltage that varies with engine speed. The voltage regulator and rectifier convert this voltage into a usable DC voltage and keep the charging voltage within an appropriate range. A properly functioning regulator is therefore essential for the battery, lighting, ECU, and other electronics.
In this collection, you will find Carmo voltage regulators for various Ducati, Honda, Suzuki, and other motorcycles. Many products are developed as modern replacements for original regulators that no longer function reliably due to age, heat, or internal wear.
Always check the original part number, plug configuration, number of wires, and specified application. Voltage regulators that look similar may be wired differently internally.
The stator generates alternating voltage. The rectifier section converts this into direct voltage, after which the regulator prevents the voltage from rising uncontrollably as engine speed increases.
If the charging voltage is too low, the battery will not charge sufficiently while riding. Too high a charging voltage can damage the battery, lights, and electronic components.
A MOSFET regulator uses modern electronic circuits to regulate the voltage. When technically suitable, this can operate more efficiently and with less internal heat generation than certain older regulator designs.
However, a MOSFET version does not fix a defective stator, burnt connector, or poor ground. Always check the complete charging system.
Selected Carmo regulators are suitable for LiFePO4 lithium batteries as well as AGM, gel, and lead-acid batteries. This does not automatically apply to every random voltage regulator.
Check the specified compatibility and measure the charging voltage after installation. Even a lithium battery requires a properly functioning charging system that stays within the prescribed voltage limits.
Discolored or melted connectors indicate heat and electrical resistance. Replace damaged connectors and check stator wires, battery terminals, and ground connections before installing a new regulator.
After installation, measure the battery voltage with the engine off, at idle speed, and at increased speed. If in doubt, have an electrical diagnosis performed by a motorcycle specialist.