Loctite SF 7200 packningsborttagare för motorblock

LOCTITE® SF 7200 - Professional gasket remover for metal surfaces

• Quickly and safely removes cured gaskets from metal flanges
• Ideal for aluminum and other soft metals - prevents damage
• Remains adhered to vertical surfaces thanks to its foaming action
• Easy to apply with an aerosol can
• Contains no CFCs and is solvent-based for optimal performance
• Applying a new gasket? Use Loctite 5926 liquid gasket

LOCTITE® SF 7200 is a high-quality, amber-colored gasket remover in aerosol form. This professional formula is designed to loosen cured chemical gaskets and sealant residue from metal surfaces - without the need for aggressive scraping. The foaming film adheres well, even to vertical surfaces, and prevents the product from running off, allowing it to work effectively on the seal.

Applications

Specially designed for use on aluminum, cast iron, and other metal flanges, where traditional scraping can damage the surface. Suitable for removing anaerobic and silicone sealants, as well as stubborn residues such as dried oil, grease, varnish, or carbon deposits on metal parts.

Use

1. Protect painted parts from overspray; LOCTITE SF 7200 attacks paint.
2. Spray a generous layer onto the surface from a distance of approximately 20–30 cm.
3. Allow the product to work for 10–15 minutes (approximately 30 minutes for silicone gaskets).
4. Remove residue with a soft plastic scraper and clean the flange with LOCTITE® 7063 or a suitable degreaser.

Technical properties

• Type: Solvent-based mixture of glycol ethers and hydrocarbons
• Color: Amber
• Density: 0.86 – 0.90 g/cm³ at 25 °C
• pH value: 10.6 – 11.0 at 20 °C
• Dry residue: approx. 4%
• Propellant: Propane
• Storage temperature: 8 – 21 °C (dry, away from heat sources)

Safety advice

Pressurized aerosol can. Do not expose to direct sunlight or temperatures above 50 °C. Do not pierce or burn, even after use. Do not spray on open flames or glowing surfaces.

Q&A - Frequently asked questions

Can I also use LOCTITE SF 7200 on plastic components?

No. This product is intended exclusively for metal components. It may damage plastic.

Is this product suitable for motorcycles?

Yes, provided it is applied to metal surfaces such as engine crankcases, cover surfaces, or flange connections. Ideal for engine block maintenance or rebuilding.

Do I need to treat the surface after removing the old gasket?

Yes. Thoroughly clean the surface with LOCTITE 7063 or a similar cleaning agent before applying new gasket materials.

LOCTITE® SF 7200 is the safe and efficient choice for professional mechanics and enthusiasts who want to remove gaskets without damage or excessive scraping.