{"product_id":"cnc-racing-ga022s-paddockstandpen-25-7mm-ducati-hypermotard-950-rve-2020","title":"CNC Racing GA022S 25.7 mm paddock stand pin for Ducati Hypermotard 950 RVE (2020–2025)","description":"\u003ch2\u003eConnect your CNC Racing rear stand to your Hypermotard\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSeparate adapter pin for the CNC Racing GA020R rear stand.\u003c\/li\u003e\u003cli\u003e25.7 mm application for your Ducati Hypermotard 950 RVE (2020–2025).\u003c\/li\u003e\u003cli\u003eMachined aluminium construction with a precisely formed shape.\u003c\/li\u003e\u003cli\u003ePractical replacement for a missing or damaged pin.\u003c\/li\u003e\u003cli\u003eComplete stand with pin available as a separate package.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eA small part with a specific purpose\u003c\/h3\u003e\u003cp\u003eAlready own a CNC Racing GA020R single-sided rear paddock stand, but need the correct pin for your Ducati Hypermotard 950 RVE? The GA022S adapter pin connects the stand to the intended opening in the rear axle. It is a targeted addition to your existing workshop equipment: buy the part you need without buying a complete stand again. This separate version is also useful when replacing a pin that has been lost or damaged.\u003c\/p\u003e\u003ch3\u003eThe right size for this application\u003c\/h3\u003e\u003cp\u003eThis model listing covers the 25.7 mm application for the Ducati Hypermotard 950 RVE (2020–2025). CNC Racing specifies diameters of 25.1 and 25.7 mm for the GA022S pin. Check both the stand you are using and the motorcycle’s rear axle configuration before ordering, particularly if the swingarm or axle has been changed. Matching wheel sizes or a similar-looking motorcycle do not establish which adapter pin is required for the actual connection.\u003c\/p\u003e\u003ch3\u003eMachined from aluminium\u003c\/h3\u003e\u003cp\u003eThe GA022S is machined from aluminium. Its shape provides the mechanical interface between the pin, the stand and the motorcycle; it is a mounting component and cannot support the bike on its own. Use it with the intended CNC Racing GA020R stand and follow the relevant instructions for fitting and securing the pin. The red component shown in the installation photograph is the stand itself and is not supplied with this separate pin.\u003c\/p\u003e\u003ch3\u003eChoose a pin or a complete package\u003c\/h3\u003e\u003cp\u003eIf you do not already own a suitable rear stand, the complete stand set is the practical option. It combines the stand with the 25.7 mm pin, so there is no need to select those parts separately. If you already own that set, order this pin only as a spare or replacement. Use the assembled stand on a firm, level surface and rotate the rear wheel by hand during chain maintenance, with the engine switched off.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/products\/cnc-racing-enkelzijdige-paddockstand-staal-inc-25-7mm-pen-ducati-hypermotard-950-rve-2020\"\u003eView the complete CNC Racing stand with 25.7 mm pin for your Ducati Hypermotard 950 RVE.\u003c\/a\u003e\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eIs the paddock stand included?\u003c\/h4\u003e\u003cp\u003eNo. This listing supplies only the GA022S adapter pin. The red stand in the installation photo is shown for illustration.\u003c\/p\u003e\u003ch4\u003eWhich stand is this pin intended for?\u003c\/h4\u003e\u003cp\u003eThe CNC Racing GA020R single-sided rear stand. Check the connection before using another stand; matching pin diameter alone is not enough.\u003c\/p\u003e\u003ch4\u003eDo I need this with the complete GeGShop set?\u003c\/h4\u003e\u003cp\u003eNo. The model-specific GA020R-257 package already includes a 25.7 mm pin.\u003c\/p\u003e\u003ch4\u003eWill it work after a motorcycle conversion?\u003c\/h4\u003e\u003cp\u003eCheck the required diameter and connection if the swingarm or rear axle differs from the original configuration.\u003c\/p\u003e","brand":"CNC Racing","offers":[{"title":"Default Title","offer_id":57905406542150,"sku":"GA022S","price":27.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/GA022S_8ea1e50a-f971-4c60-9954-975daa6f440c.jpg?v=1754402715","url":"https:\/\/gegshop.com\/products\/cnc-racing-ga022s-paddockstandpen-25-7mm-ducati-hypermotard-950-rve-2020","provider":"G\u0026G Shop","version":"1.0","type":"link"}