{"title":"Winglets","description":"\u003ch1\u003eWinglets for Aerodynamics and Appearance\u003c\/h1\u003e\n\u003cp\u003eWinglets give modern sport motorcycles their distinctive, race-oriented look. These aerodynamic elements are mounted on the front or side of the fairing and can, depending on the design, influence the airflow around the motorcycle. In this collection, you will find model-specific winglets in various materials and finishes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGive the motorcycle a pronounced racing appearance\u003c\/li\u003e\n\u003cli\u003eFollow the shape and lines of the front or side fairing\u003c\/li\u003e\n\u003cli\u003eModel-specifically developed for a perfect fit\u003c\/li\u003e\n\u003cli\u003eAvailable as a replacement or sporty upgrade\u003c\/li\u003e\n\u003cli\u003eOptions include plastic, aluminum, and carbon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInspired by Modern Race Bikes\u003c\/h2\u003e\n\u003cp\u003eWinglets originated from the development of aerodynamics in MotoGP and the World Superbike Championship, among others. Nowadays, similar elements can also be found on various street motorcycles. They enhance the technical and aggressive look of the front end.\u003c\/p\u003e\n\u003cp\u003eAftermarket winglets can serve as replacements for damaged original parts or as a visual upgrade for motorcycles that were not equipped with the same version from the factory.\u003c\/p\u003e\n\u003ch2\u003eAerodynamic Design\u003c\/h2\u003e\n\u003cp\u003eThe shape and angle of a winglet determine how the air flows around it. In functionally developed systems, this can affect the pressure around the front of the motorcycle at higher speeds. The actual effect depends on the design, mounting position, riding speed, and the rest of the fairing.\u003c\/p\u003e\n\u003cp\u003eNot every aftermarket winglet is aerodynamically tested. When the manufacturer does not provide measurement data or test results, the part should primarily be considered an aesthetic upgrade.\u003c\/p\u003e\n\u003ch2\u003eModel-Specific Fit\u003c\/h2\u003e\n\u003cp\u003eWinglets must fit precisely to the fairing. The shape of the mounting surface, the position of the mounting holes, and the angle of the part vary per motorcycle and model generation. Therefore, always choose a version explicitly developed for your model and year of manufacture.\u003c\/p\u003e\n\u003cp\u003eAlso check whether the winglets are suitable for original fairing parts or for a specific race fairing. A similar outer shape does not automatically mean the mounting points match.\u003c\/p\u003e\n\u003ch2\u003eVarious Materials and Finishes\u003c\/h2\u003e\n\u003cp\u003eWinglets are available in plastic, aluminum, and carbon. Plastic is practical and often matches original parts. CNC-machined aluminum gives a technical character, while carbon is mainly chosen for its low weight and high-quality, sporty appearance.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to carbon winglets, pay attention to the weave pattern and finish. Glossy and matte carbon can look very different visually and should preferably match the other carbon parts of the motorcycle.\u003c\/p\u003e\n\u003ch2\u003eInstallation and Mounting\u003c\/h2\u003e\n\u003cp\u003eInstallation can vary from mounting on existing mounting points to drilling additional holes in the fairing. Check this in the product information beforehand. Always use the supplied mounting hardware and ensure the load is well distributed over the fairing part.\u003c\/p\u003e\n\u003cp\u003eAfter installation, check that both winglets are aligned equally and securely fastened. Also, make sure they do not contact levers, cables, or other parts at full steering lock.\u003c\/p\u003e","products":[{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-2020-2022","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2020-2022)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455485284678,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1.jpg?v=1744380037"},{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-2023-2024","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455488201030,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_f4ea4d77-6fec-464f-84a7-9d74314bf561.jpg?v=1744380040"},{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-lamborghini-2023","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 Lamborghini (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455489184070,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_e3e973ca-37ad-4ce7-b65e-1baa26c7f030.jpg?v=1744380040"},{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-s-2020-2022","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2020-2022)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455489544518,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_3dac049a-b71b-44e5-87c8-05c269f9f21f.jpg?v=1744380041"},{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-s-2023-2024","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455489773894,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_ed142769-4540-4b3c-939e-3114b75dde56.jpg?v=1744380047"},{"product_id":"41974-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v4-sp-2022","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 SP (2022+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.008.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455490462022,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_3564ddee-3341-45f1-8a78-ef4164c12b5b.jpg?v=1744380050"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-2020-2022","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2020-2022)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455490560326,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1.jpg?v=1744380050"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-2023-2024","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455490625862,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_f288dd30-086a-4692-a4d1-b786f99fc5f3.jpg?v=1744380052"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-lamborghini-2023","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 Lamborghini (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455491182918,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_4b1a10d5-8e75-4bbe-83be-4a4a40267a97.jpg?v=1744380058"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-s-2020-2022","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2020-2022)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455492034886,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_5013bdae-4208-461e-91c0-ce7cc90f34fc.jpg?v=1744380060"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-s-2023-2024","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2023+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455492329798,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_36df214d-f39a-485d-a0f3-b2c3d102a384.jpg?v=1744380060"},{"product_id":"41975-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v4-sp-2022","title":"Winglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 SP (2022+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.No: Vf.108.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455492428102,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_64fdd08e-88d7-4d37-9c34-f95c16d36f48.jpg?v=1744380062"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-2020-2022","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2020-2022)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455492723014,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1.jpg?v=1744380067"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-2023-2024","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2023+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455493247302,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_dd20a5c1-12d1-49af-b988-d900c15cebc5.jpg?v=1744380070"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-lamborghini-2023","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 Lamborghini (2023+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455493411142,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_5b68664b-4c0d-4700-a397-67342f29ec4c.jpg?v=1744380071"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-s-2020-2022","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2020-2022)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455493476678,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_b8317438-eb48-4798-bc8d-98699cd76bce.jpg?v=1744380073"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-s-2023-2024","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2023+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455494132038,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_cdfaa9c7-c1e0-4db6-be84-0c25db89702f.jpg?v=1744380078"},{"product_id":"41976-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v4-sp-2022","title":"Winglet Kit Right Glossy Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 SP (2022+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v4 \/ v4s\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.009.SFV4G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455494426950,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_6d0b90fc-720c-4e43-95d1-1c3879c00202.jpg?v=1744380081"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-2020-2022","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2020-2022)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455494754630,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1.jpg?v=1744380082"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-2023-2024","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 (2023+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455495115078,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_683d85ed-30cc-4432-96b3-16b02e6e1e2f.jpg?v=1744380083"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-lamborghini-2023","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 Lamborghini (2023+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455495442758,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_fb5fe05e-8037-4d27-aed4-dc116205d271.jpg?v=1744380089"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-s-2020-2022","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2020-2022)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455495737670,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_417d29b2-fb3a-457b-acc8-73a1fa24a566.jpg?v=1744380093"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-s-2023-2024","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 S (2023+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455496065350,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_1a015fc4-91d7-45be-ab3d-547ababf3dac.jpg?v=1744380091"},{"product_id":"41977-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v4-sp-2022","title":"Winglet Kit Right Matt Carbon Streetfighter V4 \/ V4S Ducati Streetfighter V4 SP (2022+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V4 \/ V4S\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.109.SFV4M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455496163654,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_9445e85b-ec37-4fd2-8028-43b153362099.jpg?v=1744380093"},{"product_id":"42044-winglet-kit-left-side-glossy-carbon-bmw-s-1000-r-2021","title":"Winglet Kit Left Side Glossy Carbon BMW S1000R (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon BMW S1000R\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.015.S121N.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter S1000R are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455543152966,"sku":"VFL.015.S121N.K","price":499.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/BMW_S1000R_2021_Ilmberger_carbon_14_1.jpg?v=1744380403"},{"product_id":"42045-winglet-kit-right-side-glossy-carbon-bmw-s-1000-r-2021","title":"Winglet Kit Right Side Glossy Carbon BMW S1000R (2021+)","description":"\u003ch2\u003eWinglet Kit Right Side Glossy Carbon BMW S1000R\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.018.S121N.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter S1000R are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455543611718,"sku":"VFR.018.S121N.K","price":499.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/BMW_S1000R_2021_Ilmberger_carbon_12_1.jpg?v=1744380406"},{"product_id":"42121-winglet-kit-left-side-glossy-carbon-aprilia-tuono-v4-2021","title":"Winglet Kit Left Side Glossy Carbon Aprilia Tuono V4 (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.003.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to Ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455614456134,"sku":"VFL.017.TU21G.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_VFL_017_TU21G_K_1.jpg?v=1744380758"},{"product_id":"42121-winglet-kit-left-side-glossy-carbon-aprilia-tuono-v4-factory-2021","title":"Winglet Kit Left Side Glossy Carbon Aprilia Tuono V4 Factory (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.003.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe big eye-catcher on the streetfighter v4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to Ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455614751046,"sku":"VFL.017.TU21G.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_VFL_017_TU21G_K_1_5af23056-7369-4c0c-9412-76cbab335b0e.jpg?v=1744380765"},{"product_id":"42122-winglet-kit-left-side-matt-carbon-aprilia-tuono-v4-2021","title":"Winglet Kit Left Side Matt Carbon Aprilia Tuono V4 (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.103.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455615045958,"sku":"VFL.117.TU21M.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_10.jpg?v=1744380760"},{"product_id":"42122-winglet-kit-left-side-matt-carbon-aprilia-tuono-v4-factory-2021","title":"Winglet Kit Left Side Matt Carbon Aprilia Tuono V4 Factory (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.103.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455615603014,"sku":"VFL.117.TU21M.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_10_7f12c7cd-a903-41af-bfd2-122e7a801611.jpg?v=1744380765"},{"product_id":"42123-winglet-kit-rechts-glossy-carbon-aprilia-tuono-v4-2021","title":"Winglet Kit Right Glossy Carbon Aprilia Tuono V4 (2021+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon Aprilia tuono v4\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.004.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003cbr\u003e\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455615701318,"sku":"VFR.018.TU21G.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_VFR_018_TU21G_K_1.jpg?v=1744380766"},{"product_id":"42123-winglet-kit-rechts-glossy-carbon-aprilia-tuono-v4-factory-2021","title":"Winglet Kit Right Glossy Carbon Aprilia Tuono V4 Factory (2021+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon Aprilia tuono v4\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.004.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003cbr\u003e\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455615766854,"sku":"VFR.018.TU21G.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_VFR_018_TU21G_K_1_4bbd0359-3f01-49ef-b6c4-440b18e6a339.jpg?v=1744380768"},{"product_id":"42124-winglet-kit-rechts-matt-carbon-aprilia-tuono-v4-2021","title":"Winglet Kit Right Matt Carbon Aprilia Tuono V4 (2021+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.104.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003cbr\u003e\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455616061766,"sku":"VFR.118.TU21M.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_22.jpg?v=1744380775"},{"product_id":"42124-winglet-kit-rechts-matt-carbon-aprilia-tuono-v4-factory-2021","title":"Winglet Kit Right Matt Carbon Aprilia Tuono V4 Factory (2021+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Aprilia Tuono V4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.104.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Tuono V4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your Tuono An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra Sporty looks to the tuono.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Attention to Small Details:\u003cbr\u003e\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455616815430,"sku":"VFR.118.TU21M.K","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_Tuono_V4_ab2021_Ilmberger_Carbon_22_9554ab34-6494-4d65-951f-795125fe7b17.jpg?v=1744380776"},{"product_id":"42163-winglet-kit-left-side-glossy-carbon-aprilia-rsv4-2021","title":"Winglet Kit Left Side Glossy Carbon Aprilia RSV4 (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Aprilia RSV4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.003.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the RSV4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your RSV4 An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra sporty looks to the rsv4.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455632576838,"sku":"VFL.003.RS21G.K","price":169.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_RSV_V4_ab2021_Ilmberger_Carbon_9.jpg?v=1744380864"},{"product_id":"42164-winglet-kit-left-side-matt-carbon-aprilia-rsv4-2021","title":"Winglet Kit Left Side Matt Carbon Aprilia RSV4 (2021+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Aprilia RSV4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.103.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the RSV4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your RSV4 An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra sporty looks to the rsv4.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455632740678,"sku":"VFL.103.RS21M.K","price":169.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_RSV_V4_ab2021_Ilmberger_Carbon_VFL_103_RS2M_K_1.jpg?v=1744380871"},{"product_id":"42165-winglet-kit-rechts-glossy-carbon-aprilia-rsv4-2021","title":"Winglet Kit Right Glossy Carbon Aprilia RSV4 (2021+)","description":"\u003ch2\u003eWinglet kit right glossy carbon Aprilia rsv4\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.004.TU21G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the RSV4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your RSV4 An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra sporty looks to the rsv4.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455633428806,"sku":"VFR.004.RS21G.K","price":169.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_RSV_V4_ab2021_Ilmberger_Carbon_10.jpg?v=1744380865"},{"product_id":"42166-winglet-kit-rechts-matt-carbon-aprilia-rsv4-2021","title":"Winglet Kit Right Matt Carbon Aprilia RSV4 (2021+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Aprilia RSV4\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.104.TU21M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the RSV4 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Winglets For An Extra Accent And Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Matt Surface and Giving Your RSV4 An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that Aprilia's design stays intact While Still Adding Extra sporty looks to the rsv4.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455634149702,"sku":"VFR.104.RS21M.K","price":169.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Aprilia_RSV_V4_ab2021_Ilmberger_Carbon_VFR_104_RS21M_K_1.jpg?v=1744380871"},{"product_id":"42189-complete-winglet-kit-left-right-glossy-carbon-ducati-panigale-v2-2020","title":"Complete Winglet Kit (Left+Right) Glossy Carbon Ducati Panigale V2 2020+ Ducati Panigale V2 (2020+)","description":"\u003ch2\u003eComplete Winglet Kit (Left+Right) Glossy Carbon Ducati Panigale V2 2020+\u003c\/h2\u003e\n\u003cp\u003eArt.No: WIK.007V220G.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eThis set come with drilling templates, to assist you in drilling holes in the right places in the stock fairings. These winglets follow the contours of the stock cowl correctly.��\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eThese Winglets Will Fit the Ilmberger Carbon Side Fairing Panels�����\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42177-vel-008-v220g-k-zijpaneel-rechterzijde-glanzend-carbon-ducati-panigale-v2-2020.html\"\u003e\u003cspan\u003eVel.008.V220G.K\u003c\/span\u003e\u003c\/a\u003e��and���\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42181-VER-009-V220G-K-Zijpaneel-rechterzijde-met-montagepunten-voor-winglets-glanzend-carbon-Ducati-Panigale-V2-2020.html\"\u003e\u003cspan\u003eFar.009.v220g.k\u003c\/span\u003e\u003c\/a\u003e��wood modifications.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455649681734,"sku":"WIK.007.V220G.K","price":749.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V2_Ilmberger_Carbon_WIK_007_V220G_K_1.jpg?v=1744380933"},{"product_id":"42189-complete-winglet-kit-left-right-glossy-carbon-ducati-panigale-v2-bayliss-1st-champion-20th-anniversary-2022","title":"Complete Winglet Kit (Left+Right) Glossy Carbon Ducati Panigale V2 2020+ Ducati Panigale V2 Bayliss 1st Champion 20th Anniversary (2022+)","description":"\u003ch2\u003eComplete Winglet Kit (Left+Right) Glossy Carbon Ducati Panigale V2 2020+\u003c\/h2\u003e\n\u003cp\u003eArt.No: WIK.007V220G.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eThis set come with drilling templates, to assist you in drilling holes in the right places in the stock fairings. These winglets follow the contours of the stock cowl correctly.��\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eThese Winglets Will Fit the Ilmberger Carbon Side Fairing Panels�����\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42177-vel-008-v220g-k-zijpaneel-rechterzijde-glanzend-carbon-ducati-panigale-v2-2020.html\"\u003e\u003cspan\u003eVel.008.V220G.K\u003c\/span\u003e\u003c\/a\u003e��and���\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42181-VER-009-V220G-K-Zijpaneel-rechterzijde-met-montagepunten-voor-winglets-glanzend-carbon-Ducati-Panigale-V2-2020.html\"\u003e\u003cspan\u003eFar.009.v220g.k\u003c\/span\u003e\u003c\/a\u003e��wood modifications.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455650206022,"sku":"WIK.007.V220G.K","price":749.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V2_Ilmberger_Carbon_WIK_007_V220G_K_1_4ff72481-be93-4f16-a9bc-d35edb55933e.jpg?v=1744380936"},{"product_id":"42190-complete-winglet-kit-left-right-matt-carbon-ducati-panigale-v2-2020","title":"Complete Winglet Kit (Left+Right) Matt Carbon Ducati Panigale V2 2020+ Ducati Panigale V2 (2020+)","description":"\u003ch2\u003eComplete Winglet Kit (Left+Right) Matt Carbon Ducati Panigale V2 2020+\u003c\/h2\u003e\n\u003cp\u003eArt.No: Wik.107V220m.k\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eThis set come with drilling templates, to assist you in drilling holes in the right places in the stock fairings. These winglets follow the contours of the stock cowl correctly.��\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eThese Winglets Will Fit the Ilmberger Carbon Side Fairing Panels�����\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42178-vel-108-v220m-k-zijpaneel-rechterzijde-mat-carbon-ducati-panigale-v2-2020.html\"\u003e\u003cspan style=\"color:#d0121a;text-decoration:underline;\"\u003eVel.108.V220m.k\u003c\/span\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42182-VER-109-V220M-K-Zijpaneel-rechterzijde-met-montagepunten-voor-winglets-mat-carbon-Ducati-Panigale-V2-2020.html\"\u003e\u003cspan style=\"color:#d0121a;text-decoration:underline;\"\u003eVer.109.V220M.K\u003c\/span\u003e\u003c\/a\u003e��wood modifications.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455650271558,"sku":"WIK.107.V220M.K","price":749.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V2_ilmberger_carbon_55_2.jpg?v=1744380937"},{"product_id":"42190-complete-winglet-kit-left-right-matt-carbon-ducati-panigale-v2-bayliss-1st-champion-20th-anniversary-2022","title":"Complete Winglet Kit (Left+Right) Matt Carbon Ducati Panigale V2 2020+ Ducati Panigale V2 Bayliss 1st Champion 20th Anniversary (2022+)","description":"\u003ch2\u003eComplete Winglet Kit (Left+Right) Matt Carbon Ducati Panigale V2 2020+\u003c\/h2\u003e\n\u003cp\u003eArt.No: Wik.107V220m.k\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eThis set come with drilling templates, to assist you in drilling holes in the right places in the stock fairings. These winglets follow the contours of the stock cowl correctly.��\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cstrong\u003eThese Winglets Will Fit the Ilmberger Carbon Side Fairing Panels�����\u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42178-vel-108-v220m-k-zijpaneel-rechterzijde-mat-carbon-ducati-panigale-v2-2020.html\"\u003e\u003cspan style=\"color:#d0121a;text-decoration:underline;\"\u003eVel.108.V220m.k\u003c\/span\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/gegshop.nl\/en\/ilmberger-carbonparts\/42182-VER-109-V220M-K-Zijpaneel-rechterzijde-met-montagepunten-voor-winglets-mat-carbon-Ducati-Panigale-V2-2020.html\"\u003e\u003cspan style=\"color:#d0121a;text-decoration:underline;\"\u003eVer.109.V220M.K\u003c\/span\u003e\u003c\/a\u003e��wood modifications.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455650500934,"sku":"WIK.107.V220M.K","price":749.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V2_ilmberger_carbon_55_2_deb49218-75f1-4756-848b-d0ad7a9b1ff0.jpg?v=1744380939"},{"product_id":"42235-winglet-kit-left-side-glossy-carbon-ducati-streetfighter-v2-2022","title":"Winglet Kit Left Side Glossy Carbon Streetfighter V2 2022+ Ducati Streetfighter V2 (2022+)","description":"\u003ch2\u003eWinglet Kit Left Side Glossy Carbon Streetfighter V2\u003c\/h2\u003e\n\u003cp\u003eArt.no: VfL.008.SFV2G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter V2 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455683268934,"sku":"VFL.008.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_008_SFV4G_K_1_51300084-5fdd-4ead-a95a-bd29e0ffa964.jpg?v=1744381087"},{"product_id":"42236-winglet-kit-left-side-matt-carbon-ducati-streetfighter-v2-2022","title":"Winglet Kit Left Side Matt Carbon Streetfighter V2 2022+ Ducati Streetfighter V2 (2022+)","description":"\u003ch2\u003eWinglet Kit Left Side Matt Carbon Streetfighter V2\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.108.SFV2M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Left Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter V2 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455683465542,"sku":"VFL.108.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFL_108_SFV4M_K_1_b8686f91-cdd6-42c3-940f-66f22e30d6b8.jpg?v=1744381082"},{"product_id":"42237-winglet-kit-rechts-glossy-carbon-ducati-streetfighter-v2-2022","title":"Winglet Kit Right Glossy Carbon Streetfighter V2 2022+ Ducati Streetfighter V2 (2022+)","description":"\u003ch2\u003eWinglet kit on the right glossy carbon streetfighter v2\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.009.SFV2G.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful High Gloss Finish\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter V2 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These with A Set of Glossy Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their High Gloss Surface and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455683924294,"sku":"VFR.009.SFV4G.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_009_SFV4G_K_1_767b3122-06be-4943-b5ea-a4ee6e9db03c.jpg?v=1744381088"},{"product_id":"42238-winglet-kit-rechts-matt-carbon-ducati-streetfighter-v2-2022","title":"Winglet Kit Right Matt Carbon Streetfighter V2 2022+ Ducati Streetfighter V2 (2022+)","description":"\u003ch2\u003eWinglet Kit Right Matt Carbon Streetfighter V2\u003c\/h2\u003e\n\u003cp\u003eArt.No: VFR.109.SFV2M.K\u003cbr\u003e100% carbon\u003cbr\u003eFits on the oem mounting points\u003cbr\u003eReplaces The Dull Plastic Stock Winglets\u003cbr\u003eSet of Two Winglets for the Right Side\u003cbr\u003eBeautiful Matt Finish, to Match With Ducati Performance Carbon\u003cbr\u003e\u003cbr\u003eThe Big Eye-Catcher on the Streetfighter V2 are its winglets, or course. The Stock Versions Are Dull Plastic However, And You Can Easily Replace These With A Set of Matt Carbon Winglets for An Extra Accent and Better Looks.\u003cbr\u003eThese Two Winglets Replace the Stock Versions Without Modifications, Drawing the Attention to Their Subtle Matt Looks and Giving Your Sf An Upgrade in An Instance. They are similar in form to the stock versions, to ensure that ducati's design stays intact While Still Adding Extra Sporty looks to the streetfighter.\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455684219206,"sku":"VFR.109.SFV4M.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_SF_V4_Ilmberger_Carbon_VFR_109_SFV4M_K_1_adf5675b-9ed9-49cf-9dce-54bdb72afd01.jpg?v=1744381097"},{"product_id":"42263-winglet-left-side-glossy-carbon-ducati-panigale-v4-v4s-2022","title":"Winglet Left Side Glossy Carbon Ducati Panigale V4 \/ V4S 2022+","description":"\u003ch2\u003eWinglet Left Side Glossy Carbon Ducati Panigale V4 \/ V4S 2022+\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.002.V422G.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455695786310,"sku":"VFL.002.V422G.K","price":329.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V4_ab2022_Ilmberger_Carbon_12.jpg?v=1744381145"},{"product_id":"42264-winglet-left-side-matt-carbon-ducati-panigale-v4-v4s-2022","title":"Winglet Left Side Matt Carbon Ducati Panigale V4 \/ V4S 2022+","description":"\u003ch2\u003eWinglet Left Side Matt Carbon Ducati Panigale V4 \/ V4S 2022+\u003c\/h2\u003e\n\u003cp\u003eArt.No: VfL.102.V422M.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455696965958,"sku":"VFL.102.V422M.K","price":329.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V4_ab2022_Ilmberger_Carbon_VFL_102_V422M_K_1.jpg?v=1744381144"},{"product_id":"42265-winglet-right-side-glossy-carbon-ducati-panigale-v4-v4s-2022","title":"Winglet Right Side Glossy Carbon Ducati Panigale V4 \/ V4S 2022+","description":"\u003ch2\u003eWinglet Right Side Glossy Carbon Ducati Panigale V4 \/ V4S 2022+\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.003.V422G.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455697326406,"sku":"VFR.003.V422G.K","price":329.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V4_ab2022_Ilmberger_Carbon_10.jpg?v=1744381150"},{"product_id":"42266-winglet-right-side-matt-carbon-ducati-panigale-v4-v4s-2022","title":"Winglet Right Side Matt Carbon Ducati Panigale V4 \/ V4S 2022+","description":"\u003ch2\u003eWinglet Right Side Matt Carbon Ducati Panigale V4 \/ V4S 2022+\u003c\/h2\u003e\n\u003cp\u003eArt.no: VFR.103.V422M.K\u003cbr\u003eManufacturer: Ilmberger Carbonparts\u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is supplied with this carbon part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding depth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Even after Extensive Testing Under The Toughest Test Conditions in the Laboratory the Plastic Coating Shines Like New? It has bone tuv-certified for its resistance to aging, weathering and uv resistance.\u003cbr\u003e\u003cstrong\u003eQuality is Ilmberger Carbonparts' no. 1 priority.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/shop.ilmberger-carbon.de\/uploads\/icons_tuev_abe_kunststoff.png\" alt=\"\" width=\"320\" height=\"100\"\u003e\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50455697523014,"sku":"VFR.103.V422M.K","price":329.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Panigale_V4_ab2022_Ilmberger_Carbon_VFR_103_V422M_K_1.jpg?v=1744381150"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/collections\/CM_VFL_001_V4R25_1_2e9bdaf4-4173-4b14-a7fc-117ce62b7ca5.jpg?v=1782298230","url":"https:\/\/gegshop.com\/collections\/winglets.oembed","provider":"G\u0026G Shop","version":"1.0","type":"link"}