{"title":"Frame Cover","description":"\u003ch1\u003eCarbon frame covers for a sporty and exclusive look\u003c\/h1\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplace or cover standard frame parts with model-specific carbon that fits tightly with the design of your motorcycle\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe frame forms the technical base of the motorcycle and is clearly visible on many models between the tank, engine block, and rear section. Standard plastic panels or simply finished frame parts can therefore stand out strongly. With a model-specific carbon frame cover, you give this central area a more exclusive and sportier appearance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eModel-specific shaped for a tight fit\u003c\/li\u003e\n  \u003cli\u003eHigh-quality carbon finish around the motorcycle frame\u003c\/li\u003e\n  \u003cli\u003eAvailable as left, right, or complete cover sets\u003c\/li\u003e\n  \u003cli\u003eChoice of matte and glossy finishes\u003c\/li\u003e\n  \u003cli\u003eBeautifully combinable with other carbon fairing and engine block parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIn this collection, you will find carbon frame covers from Ilmberger CarbonParts among others. Depending on the motorcycle, these can be triangular frame panels, small finishing parts, or larger left and right covers. Some products replace an original plastic part, while others are mounted over an existing frame section or panel.\u003c\/p\u003e\n\n\u003cp\u003eThe available version varies by model. In addition to matte and glossy carbon finishes, Black Diamond Carbon versions are also available for selected applications. For a cohesive result, we recommend choosing the same carbon pattern and finish as the other carbon parts on the motorcycle.\u003c\/p\u003e\n\n\u003ch2\u003eAn aesthetic upgrade in a central position\u003c\/h2\u003e\n\n\u003cp\u003eA frame cover is primarily a visual upgrade. The part does not change the load-bearing structure of the frame but gives a prominently visible area a higher-quality finish. Because the covers are often located directly under the tank or next to the seat, you can see the difference both when the motorcycle is stationary and when mounting it.\u003c\/p\u003e\n\n\u003cp\u003eA cover also forms an extra layer over the covered surface. This helps protect the original part better against light wear, dirt, and contact with motorcycle clothing. However, a carbon frame cover is not a crash protector and is not designed to absorb heavy impact in a fall.\u003c\/p\u003e\n\n\u003ch2\u003eReplacement part or cover over the original\u003c\/h2\u003e\n\n\u003cp\u003eAlways check how the chosen frame cover is mounted. Some versions replace a standard plastic panel and use the original mounting points. Other covers are attached to the existing part with mounting tape, adhesive, or additional fasteners.\u003c\/p\u003e\n\n\u003cp\u003eFor an adhesive version, the mounting surface must be completely clean, dry, and grease-free. First, fit the cover without glue or permanent tape to check the position. For a replacement part, original rubbers, clips, or fasteners may need to be transferred.\u003c\/p\u003e\n\n\u003ch2\u003ePay attention to side, version, and model year\u003c\/h2\u003e\n\n\u003cp\u003eFrame covers are often sold separately as left or right parts. Therefore, check whether the product price refers to one side or a complete set. Small and large covers for the same motorcycle can also be separate products.\u003c\/p\u003e\n\n\u003cp\u003eAlways select the exact motorcycle model, version, and model year. A different subframe, tank panel, or fairing part can change the shape and mounting. Always install carbon parts without tension and use only the prescribed tightening torque.\u003c\/p\u003e","products":[{"product_id":"10249-carbon-frame-covers-bmw-s-1000-rr-2010-2011","title":"Carbon Frame Covers BMW S1000RR (2010-2011)","description":"This full carbon frame cover set (Left and Right Side) Fits the BMW S1000RR and Will Be Delivered in A Ready to Install Manner, No Further Adjustments to the Bike Or Parts Are Required. The Set is not only a beautiful accessory, but also functional and it will protect the motor's frame. The Cover Set is AutoClavely Produced and finished with a durable high -tech gelcoating. This component has a very beautiful, deep gloss that will last. The Unique Synthetic Coating is Easier to SPRYPAINT as it does not react with the paint layer. Now it is Easier for you to color the carbon parts the way you want. \u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes the Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452119519558,"sku":"RAA.021.S100S.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr_carbon_45.jpg?v=1744368264"},{"product_id":"10249-carbon-frame-covers-bmw-s-1000-rr-street-2009-2011","title":"Carbon Frame Covers BMW S1000RR Street (2009-2011)","description":"This full carbon frame cover set (Left and Right Side) Fits the BMW S1000RR and Will Be Delivered in A Ready to Install Manner, No Further Adjustments to the Bike Or Parts Are Required. The Set is not only a beautiful accessory, but also functional and it will protect the motor's frame. The Cover Set is AutoClavely Produced and finished with a durable high -tech gelcoating. This component has a very beautiful, deep gloss that will last. The Unique Synthetic Coating is Easier to SPRYPAINT as it does not react with the paint layer. Now it is Easier for you to color the carbon parts the way you want. \u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes the Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452119552326,"sku":"RAA.021.S100S.K","price":549.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr_carbon_45_ddd879bf-56a7-4639-8ffe-3fd874efb868.jpg?v=1744368271"},{"product_id":"10280-carbon-framecovers-left-and-right-bmw-s-1000-rr-racing-2009-2011","title":"Carbon FrameCovers (Left and Right) BMW S1000RR Racing (2009-2011)","description":"\u003cp\u003eThis full carbon racing frame cover set (left and right) fits with the 2009-2011 bmw s1000rr and will be delivery in a ready-to-install state. No Further Changes to the Bike or Parts are required. The covers protect the frame in case of a sliding. The Autoclavely Produced Frame Cover Set is finished with a durable high -tech gelcoating. This component has a very beautiful, deep gloss that will last. The Unique Synthetic Coating is Easier to SPRYPAINT as it does not react with the paint layer. Now it is Easier for you to color the carbon parts the way you want. \u003cbr\u003e\u003cbr\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes the Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452121780550,"sku":"RAA.072.S1RAB.K","price":489.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr_carbon__25.jpg?v=1744368331"},{"product_id":"10353-carbon-framecover-right-ducati-diavel-2010-2013","title":"Carbon FrameCover Right Ducati Diavel Ducati Diavel (2010-2013)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452148683078,"sku":"RAR.018.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_rar1.jpg?v=1744368532"},{"product_id":"10353-carbon-framecover-right-ducati-diavel-2014-2018","title":"Carbon FrameCover Right Ducati Diavel Ducati Diavel (2014-2018)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452148748614,"sku":"RAR.018.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_rar1_6e43402f-8d80-4739-a551-dd3aeac494c4.jpg?v=1744368536"},{"product_id":"10353-carbon-framecover-right-ducati-diavel-strada-2013-2015","title":"Carbon FrameCover Right Ducati Diavel Ducati Diavel Strada (2013-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452148814150,"sku":"RAR.018.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_rar1_01a9993b-720e-4d72-9490-bf0b23e162e7.jpg?v=1744368540"},{"product_id":"10354-carbon-framecover-left-ducati-diavel-2010-2013","title":"Carbon FrameCover Left Ducati Diavel Ducati Diavel (2010-2013)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452148879686,"sku":"RAL.019.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_ral1_4551ab52-0c72-47cd-a7f9-6a2c88068ad3.jpg?v=1744368542"},{"product_id":"10354-carbon-framecover-left-ducati-diavel-2014-2018","title":"Carbon FrameCover Left Ducati Diavel Ducati Diavel (2014-2018)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452151370054,"sku":"RAL.019.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_ral1.jpg?v=1744368540"},{"product_id":"10354-carbon-framecover-left-ducati-diavel-strada-2013-2015","title":"Carbon Framecover Left Ducati Diavel Ducati Diavel Strada (2013-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452151796038,"sku":"RAL.019.DIAVE.K","price":199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Ducati_Diavel__carbon_ral1_90eba246-c8ff-4a1e-82c3-0c2433a830f2.jpg?v=1744368546"},{"product_id":"10727-framecover-balhoofd-rechts-carbon-harley-davidson-v-rod-2001-2017","title":"FrameCover Stall Head (Right) Carbon","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452231749958,"sku":"RHR.002.HDVRG.K","price":119.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/framecover-balhoofd-rechts-carbon_0756d2b4-729f-49bf-b143-bb29f8c3c879.jpg?v=1736853915"},{"product_id":"10728-framecover-balhoofd-links-carbon-harley-davidson-v-rod-2001-2017","title":"FrameCover Balhead (left) Carbon","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452231815494,"sku":"RHL.003.HDVRG.K","price":119.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/framecover-balhoofd-links-carbon_bb6b2f25-24fe-41d0-b4c2-2081fe1dc336.jpg?v=1736853914"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-2008-2009","title":"Frame Cover Left Side Carbon Honda CBR1000RR (2008-2009)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234535238,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1.jpg?v=1744369430"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-2010-2011","title":"Frame Cover Left Side Carbon Honda CBR1000RR (2010-2011","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234568006,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1_581a41bf-efab-4913-b458-87be18bfba70.jpg?v=1744369432"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-2012-2013","title":"Frame Cover Left Side Carbon Honda CBR1000RR (2012-2013)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234600774,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1_480c19ee-c65e-4060-804d-ca7bf57c86ac.jpg?v=1744369436"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-2014-2016","title":"Frame Cover Left Side Carbon Honda CBR1000RR (2014-2016)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234633542,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1_5553558c-b1c0-4f5a-8d3b-0826a6127180.jpg?v=1744369437"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-abs-2008-2009","title":"Frame Cover Left Side Carbon Honda CBR1000RR ABS (2008-2009)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234666310,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1_f2609532-f882-44c1-9a07-dd9fc2fe3972.jpg?v=1744369438"},{"product_id":"10740-frame-cover-left-side-carbon-honda-cbr1000rr-abs-2010-2016","title":"Frame Cover Left Side Carbon Honda CBR1000RR ABS (2010-2016)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234699078,"sku":"RAL.005.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_11_1_a30fc878-0cf3-43ea-bcbc-f862fa4beadf.jpg?v=1744369442"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-2008-2009","title":"Frame Cover Right Side Carbon Honda CBR1000RR (2008-2009)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234731846,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6.jpg?v=1744369445"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-2010-2011","title":"Frame Cover Right Side Carbon Honda CBR1000RR (2010-2011","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234764614,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6_0bd9673f-a518-40eb-a892-e8dc83d4f5e3.jpg?v=1744369446"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-2012-2013","title":"Frame Cover Right Side Carbon Honda CBR1000RR (2012-2013)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234797382,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6_02a23485-4f29-43d0-b13e-e386bf00d92c.jpg?v=1744369447"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-2014-2016","title":"Frame Cover Right Side Carbon Honda CBR1000RR (2014-2016)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234862918,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6_c69e0146-1c56-4df5-810d-e29f27e985c5.jpg?v=1744369454"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-abs-2008-2009","title":"Frame Cover Right Side Carbon Honda CBR1000RR ABS (2008-2009)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452234928454,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6_071ec09b-b79e-49a9-8e3a-09eaf665f6dc.jpg?v=1744369450"},{"product_id":"10741-frame-cover-right-side-carbon-honda-cbr1000rr-abs-2010-2016","title":"Frame Cover Right Side Carbon Honda CBR1000RR ABS (2010-2016)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452235092294,"sku":"RAR.006.CBR19.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/honda_cbr1_carbon_31_6_194632fb-2530-404f-95fd-69fd3a64d90b.jpg?v=1744369454"},{"product_id":"10789-frame-cover-links-carbon-triumph-speed-triple-1050-2011-2015","title":"Frame Cover Links Carbon Triumph Speed ​​Triple 1050 (2011-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452289651014,"sku":"RAL.003.TRSPT.K","price":349.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Triumph_SpT_Carbon_130.jpg?v=1744369521"},{"product_id":"10789-frame-cover-links-carbon-triumph-speed-triple-2011-2015","title":"Frame Cover Links Carbon Triumph Speed ​​Triple (2011-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452289683782,"sku":"RAL.003.TRSPT.K","price":349.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Triumph_SpT_Carbon_130_e81ea135-5238-497f-88d0-b7435019bf50.jpg?v=1744369528"},{"product_id":"10790-frame-cover-rechts-carbon-triumph-speed-triple-1050-2011-2015","title":"Frame Cover Right Carbon Triumph Speed ​​Triple 1050 (2011-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452289945926,"sku":"RAR.004.TRSPT.K","price":349.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Triumph_SpT_Carbon_112_3.jpg?v=1744369528"},{"product_id":"10790-frame-cover-rechts-carbon-triumph-speed-triple-2011-2015","title":"Frame Cover Right Carbon Triumph Speed ​​Triple (2011-2015)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452289978694,"sku":"RAR.004.TRSPT.K","price":349.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/Triumph_SpT_Carbon_112_3_16bf34be-d09a-497f-8659-64045c830d43.jpg?v=1744369531"},{"product_id":"10909-framecover-links-bmw-s-1000-rr-2012-2014","title":"Framecover Links BMW S 1000 RR (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452353614150,"sku":"RAL.041.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_ral_1.jpg?v=1744369750"},{"product_id":"10909-framecover-links-bmw-s-1000-rr-street-2012-2014","title":"FrameCover Links BMW S 1000 RR Street (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452353646918,"sku":"RAL.041.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_ral_1_1cf09e96-8424-4f62-b686-8a6acee37811.jpg?v=1744369756"},{"product_id":"10910-framecover-rechts-bmw-s-1000-rr-2012-2014","title":"Framecover Right BMW S 1000 RR (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355383622,"sku":"RAR.042.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_rar_1.jpg?v=1744369759"},{"product_id":"10910-framecover-rechts-bmw-s-1000-rr-street-2012-2014","title":"Framecover Right BMW S 1000 RR Street (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355481926,"sku":"RAR.042.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_rar_1_354a26e8-cdb5-469a-97a7-47ec853d8309.jpg?v=1744369761"},{"product_id":"10911-crashprotector-op-frame-links-bmw-s-1000-rr-2012-2014","title":"Crash protector on Frame Links BMW S 1000 RR (2012-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355547462,"sku":"SPL.043.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spl1.jpg?v=1744369768"},{"product_id":"10911-crashprotector-op-frame-links-bmw-s-1000-rr-street-2012-2014","title":"Crash protector on Frame Links BMW S 1000 RR Street (2012-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355612998,"sku":"SPL.043.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spl1_d4bef1cd-c7d9-437a-88ac-93544b4ba063.jpg?v=1744369769"},{"product_id":"10912-crashprotector-op-frame-rechts-bmw-s-1000-rr-2012-2014","title":"Crash Protector on Frame Right BMW S 1000 RR (2012-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355678534,"sku":"SPR.044.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spr1.jpg?v=1744369770"},{"product_id":"10912-crashprotector-op-frame-rechts-bmw-s-1000-rr-street-2012-2014","title":"Crash Protector on Frame Right BMW S 1000 RR Street (2012-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452355711302,"sku":"SPR.044.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spr1_e5117e54-37f5-4f91-aa7c-8e68809aa965.jpg?v=1744369784"},{"product_id":"10934-framecover-links-bmw-s-1000-rr-racing-2012-2014","title":"Framecover Links BMW S 1000 RR Racing (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452356759878,"sku":"RAL.089.S1RAB.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_ral_1_1.jpg?v=1744369817"},{"product_id":"10935-framecover-rechts-bmw-s-1000-rr-racing-2012-2014","title":"Framecover Right BMW S 1000 RR Racing (2012-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452356923718,"sku":"RAR.090.S1RAB.K","price":229.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_rar_1_1.jpg?v=1744369820"},{"product_id":"10971-carbon-valbeschermers-voorzijde-bmw-c-600-sport-2011","title":"Carbon fall protectors front BMW C 600 Sport (2011+)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452368064838,"sku":"SPV.004.C600S.K","price":219.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_C600SP_carbon_12_2.jpg?v=1744369892"},{"product_id":"10972-carbon-valbeschermers-achterzijde-bmw-c-600-sport-2011","title":"Carbon fall protectors back BMW C 600 Sport (2011+)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452368097606,"sku":"SPH.005.C600S.K","price":269.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_C600SP_carbon_stphl_1_2.jpg?v=1744369892"},{"product_id":"10985-carbon-framecover-links-bmw-hp4-1000rr-2013-2014","title":"Carbon Framecover Links BMW HP4 1000RR (2013-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452368720198,"sku":"RAL.041.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_ral_1_b84dcd6f-c408-4f49-a869-5615dd5c6b0d.jpg?v=1744369921"},{"product_id":"10986-carbon-framecover-rechts-bmw-hp4-1000rr-2013-2014","title":"Carbon Framecover Right BMW HP4 1000RR (2013-2014)","description":"A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New ","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452368752966,"sku":"RAR.042.S100S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_rar_1_8d7ba92e-a75e-4915-988e-6d5616ab4201.jpg?v=1744369926"},{"product_id":"40005-carbon-crashprotector-links-bmw-hp4-1000rr-2013-2014","title":"Carbon Crash Protector Links BMW HP4 1000RR (2013-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452385923398,"sku":"SPL.043.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spl1_00bd8401-0ff4-4059-b71f-77c527dd3686.jpg?v=1744370001"},{"product_id":"40006-carbon-crashprotector-rechts-bmw-hp4-1000rr-2013-2014","title":"Carbon Crash Protector Right BMW HP4 1000RR (2013-2014)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452385956166,"sku":"SPR.044.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spr1_b82350fc-079c-47da-b157-fd3f6e52830f.jpg?v=1744370001"},{"product_id":"40051-crashprotector-op-frame-links-bmw-s-1000-rr-2010-2011","title":"Crash protector on Frame Links BMW S 1000 RR (2010-2011)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452400374086,"sku":"SPL.043.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spl1_5cb2b83a-305c-4b2a-b3a0-399fd59a6e7a.jpg?v=1744370280"},{"product_id":"40051-crashprotector-op-frame-links-bmw-s-1000-rr-street-2009-2011","title":"Crash protector on Frame Links BMW S 1000 RR Street (2009-2011)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452400505158,"sku":"SPL.043.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spl1_83599397-e626-48dc-9a28-d7203b505706.jpg?v=1744370284"},{"product_id":"40052-crashprotector-op-frame-rechts-bmw-s-1000-rr-2010-2011","title":"Crash Protector on Frame Right BMW S 1000 RR (2010-2011)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452400636230,"sku":"SPR.044.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spr1_17d3340c-bc3e-4477-9ff0-ab219ce3949b.jpg?v=1744370285"},{"product_id":"40052-crashprotector-op-frame-rechts-bmw-s-1000-rr-street-2009-2011","title":"Crash Protector on Frame Right BMW S 1000 RR Street (2009-2011)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452400800070,"sku":"SPR.044.S100S.K","price":179.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr12_carbon_spr1_d1664144-d035-4d5c-91da-1087d97a78be.jpg?v=1744370302"},{"product_id":"40155-carbon-framecover-rechts-bmw-s-1000-r-2013-2016","title":"Carbon Framecover Right BMW S1000R (2013-2016)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452443398470,"sku":"RAR.216.S100N.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000r_carbon_rar1.jpg?v=1744370561"},{"product_id":"40156-carbon-framecover-links-bmw-s-1000-r-2013-2016","title":"Carbon Framecover Links BMW S1000R (2013-2016)","description":"\u003cp\u003eA Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besides that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452443496774,"sku":"RAL.217.S100N.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/BMW_s1000r_carbon_9_2.jpg?v=1744370563"},{"product_id":"40328-frame-cover-right-side-carbon-bmw-s-1000-rr-2017-2018","title":"Frame Cover (Right Side) Carbon BMW S1000RR (2017-2018)","description":"\u003cp\u003eProtect and Enhance. Ilmberger's Frame Cover Makes Sure Your Bike Stands Out from Other 2015- S10000RRs, and Helps Protect Your Frame When Your Bike Falls About Or Hits The Tarmac.\u003cbr\u003eFits without the need for modifications, and is supplied with double sided adhesives. We also always add a few dots of adhesive kit, just to be sure. A Clear and Thorough Installation Guide is Delivered with This Carbon Part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Choose Carbon?\u003c\/strong\u003e\u003cbr\u003eCarbon is a great material in Terms of aesthetics, through its high-tech look. It Gives Your Bike An Exclusive and Sporty Appearance, If You Choose Quality Carbon Like Ilmberger Carbon. Besides Being Beautiful in Appearance, Ilmberger Carbon Saves Up to 70% in Weight when compared to the OEM part.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy You Should Choose Ilmberger Carbon:\u003c\/strong\u003e\u003cbr\u003eCarbon is available in a wide range of qualities, but only ilmberger carbon is of the Highest Quality, with the best Possible finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What makes Ilmberger Carbon So Special:\u003c\/strong\u003e\u003cbr\u003eNot only does Ilmberger use a high quality carbon as base material, but their experience in producing carbon ensures that the parts you order are of a very high finish. Ilmberger carbon parts are produced in the autoclave from prepreg carbon weave. The Carbon Fiber is processed dry and usual laid in fully Milled Aluminum Molds, then packed in vacuum bags. In The Next Step, the Parts Are Kept Under Constant Vacuum Within the Bag and Exposed to Additional External Pressure While Being Baked in the Autoclave for Several Hours. In Addition, The Temperature, Raised Or Lowered Several Times, Depending on which Fibres Are Being Treated. Following the Heating Process, the Parts are de-Molded and Milled and SharePend in the Water Jet Cutter or the 5 Axle Milling Machine. Then, in the Final Step, the Practical Finished Carbon Parts Are Covered with a Clear Plastic Coating. \u003cstrong\u003eExtra Attention to Small Details:\u003c\/strong\u003eWhat Really sets Ilmberger Apart is the minute Attention to the Smallest Details. The Carbon Fiber Follows The Lines of the Part, Adding That Extra Touch, which Makes The Difference Between 'Just Any Carbon Fiber Part' And The Perfect Quality of Ilmberger. The Seams Between Different Carbon Fiber Panels Are Nearly Invisible And Are Placed In Inconspicuous Corners Of The Part, To Ensure The Part Stands Out. Besids that, you will not find black spots in Ilmberger carbon parts, and if you buy a full cowl set, the patterns of the different cowl parts all follow the same path, which your cowl looks like a one-off piece. All parts are delivered ready to install, plug-and-play, and we Guarantee a no-hasle-return policy on part fitment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Clear-Coat\u003c\/strong\u003e\u003cbr\u003eIlmberger only uses a special high-tech coating to finish its products with. All parts are provid with a unique clear plastic coating that gives the carbon structure an outstanding dePth and is visual and technically superior about all conventional clearcoats. With Regard to Their Protective Effect IT Plays in a League of Its Own: Equally After Extensive Testing Under The Toughest Test Conditions In The Laboratory The Plastic Coating Shines Like New\u003c\/p\u003e","brand":"Ilmberger CarbonParts","offers":[{"title":"Default Title","offer_id":50452470104390,"sku":"RAR.310.S115S.K","price":279.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/files\/bmw_s1000rr15_carbon_ral_1.jpg?v=1744371372"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/3972\/5624\/collections\/BMW_S1000XR_2020_Ilmberger_carbon_RAR_029_1XR20_K_1_852eba86-e847-436b-8f60-2904b78a455f.jpg?v=1782207882","url":"https:\/\/gegshop.com\/collections\/framecover.oembed?page=9","provider":"G\u0026G Shop","version":"1.0","type":"link"}